6.9L / 7.3L IDI

6.9L / 7.3L IDI Pump / Injector Install Kit Fits 1983 - 1994 Our 6.9 / 7.3 IDI injector & pump installation kit includes plastic return fittings, injector o-rings and washers, return line, clamps, and line seals. If any of your return lines or connections leak, the injection pump will 'bleed back' and the truck will be very hard to start after sitting. It may briefly start and then stall requiring very long crank times to re-prime the pump. You may select injector installation kit only below,...

6.9L / 7.3L IDI Injection Lines Complete set of eight brand new fuel injection lines for Ford 6.9 / 7.3 IDI and/ International T444 engines from 1982 - 1994 both turbo and non-turbo. If you are rebuilding your engine or replacing your pump, now is a great time for new 6.9 Diesel & 7.3 IDI injector lines - injection lines do occasionally rupture and can leave you stranded. Trucks in northern states usually exhibit very rusty and pitted lines further worsening the situation. Failure to install...

Mechanical Diesel Injector Testing Service The price of this diesel injector testing service includes testing for up to 8 diesel injectors. We will test your 8 mechanical diesel injectors and provide you with an honest assessment of their condition. Tests will include pop pressure, leakage, chatter, etc. Also inlcuded in the price is return shipment via Priority mail with $100 of insurance. You may add additional insurance if desired. Injectors we will test include GM 4.3L, 5.7L, 6.2L, and...

6.9L / 7.3L IDI FORD / International - Remanufactured Injectors - (and "Tune-Up Kits") fit 1983 - 1994 Non-Turbo Typically by 100,000 miles IDI injectors are worn and new injectors will increase efficiency / fuel economy and reduce smoke. These Ford 6.9/7.3 remanufactured injectors are second to none. New tip gaskets and return o-rings are included. An additional core charge of $80 is required which will be refunded when we receive your old Ford injectors. You may also wish to purchase our...

BRAND NEWFord Vacuum Pump - 7.3L IDIOur 7.3 IDI vacuum pumps are not rebuilt or aftermarket reproductions. They are brand new from the Original Equipment Manufacturer - the highest quality available - at a fraction of the dealer cost!This Ford OEM vacuum pump fits the following applications:Ford 7.3 L from 3/1992 to 1993.Part number 0102 replaces Ford F3TZ-2A451A.Repair shops, salvage yards, auto part stores, etc. may inquire about quantity discounts. ...

Stanadyne Performance Formula Diesel Fuel Additive - Stanadyne Diesel Fuel Additive Specially Formulated for ULSD - - Case of (12) One Pint Bottles - Why should I use Stanadyne diesel fuel additive? By now, almost everyone has heard of ULSD (Ultra Low Sulfur Diesel). The previous generation of fuel was termed LSD or Low Sulfur Diesel. While LSD could contain up to 500 PPM (parts per million), ULSD can contain up to a maximum of 15 PPM of sulfur. The reduction in sulfur was for a good cause -...

- BRAND NEW - IDI Injector Set fits 1983 - 1994 6.9L / 7.3L IDI Non-turbo - Set of 8 - New return o-rings and copper chamber gaskets included. NOTE: This 6.9 / 7.3 IDI injector set will NOT fit 1994 and newer Powerstroke diesels - see  our full Powerstroke Diesel Parts category We also carry 7.3 IDI injector return line kits, which are a good investment, they make installation a lot easier, and prevent return line leaks which cause hard starts. Additionally, we offer a...

6.9L Ford / IDI Glow Plug Controller Made in the USA Fits 1983 -1987 This 6.9 glow plug controller is an updated solid state design. The original sensors were electro-mechanical and had an extremely high failure rate. Our replacements have been re-engineered using modern electronics technology for much improved reliability. Externally the sensor will appear unchanged and will plug in perfectly with no modifications. Operating characteristics have not changed. If you need to diagnose the system...

6.9L Ford IDI Glow Plugs - 6.9L Glow Plug and Controller Kit - This kit will get your glow plug system in tip-top shape for great starting! Includes a new controller and a set of our Premium dual coil glow plugs described below. Tired of frequent glow plug replacement and unacceptable starting? These are some of the best glow plugs on the market. Unlike stock and cheap aftermarket glow plugs, our Premium dual coil glow plugs do not burn out and swell after a short period of operation. Our 6.9...

7.3L IDI Glow Plug ControllerMade in the USAFits 1988 -1994We also carry glow plugs, glow plug relays, and glow plug kits for your 7.3L IDI engine.Note: This IDI glow plug controller will NOT fit 1994 and later Power-stroke engines. See this item in our other listings.

Ford / International 7.3L IDI Glow Plug Kit - New Premium Glow Plugs and Relay - Made in the USA This kit fits 1988 - 1994 7.3L IDI Diesels - It will NOT fit Powerstroke diesels. (Also fits some late 1987 6.9L diesels. What makes our 7.3 IDI glow plugs superior? Domestically made - Our Ford 7.3 glow plug replacements are the only ones manufactured in the USA - any other brand you purchase is made in another country - support American workers! OEM Quality - Mention any major player in...

DIESEL Aluminum Fuel Anti-Drainback Valve Three sizes available: 8mm / 5/16 in Fuel Line 10mm / 3/8 in and 12mm / 1/2 inch for heavy duty applications Many older diesels develop drain-back issues over time that result in difficult starting after sitting for awhile because tiny leaks in the fuel system allow the fuel to drain back to the tank while the vehicle is not in use. Finding and fixing the root cause can be very time consuming and expensive. In some cases, a more expedient solution is...

DIESEL Anti-Drainback Valve Two sizes available: 8mm / 5/16 in Fuel Line OR 10mm / 3/8 in Many older diesels develop drain-back issues over time that result in difficult starting after sitting for awhile because tiny leaks in the fuel system allow the fuel to drain back to the tank while the vehicle is not in use. Finding and fixing the root cause can be very time consuming and expensive. In some cases, a more expedient solution is to install an diesel fuel anti drain-back valve in the low...

EMERGENCY Injection Line Have a Broken Diesel Injection Line?This temporary fuel injector line replacement will get you up and running! Not intended as a permanent injector pipe repair but works great as a temporary fuel line fix until you can find an original line. Works on the following applications:GM 5.7L, 6.2L and 6.5L (Both mechanical and electronic pump models)Ford 6.9L and 7.3L IDIVW 1.5L / 1.6L / 1.9LMANYAgriculturalIndustrialand Marine Applicationswith 12 mm or 14mm connections....

- Premium Remanufactured Diesel Fuel Injectors -for Ford or International 7.3 IDI Turbo -(1992 - 1994)- Complete set of 8 -Note: For 7.3L IDI non-turbo injectors, see related items below.NOTE: If you have a 1994 or newer Powerstroke 7.3L engine, these will NOT fit - also see related items belowThese injectors come with new o-rings and copper tip gaskets.These remanufactured diesel fuel injectors are second to none. In fact, analysis on sophisticated equipment has repeatedly shown that our...

BRAND NEW - Genuine OEM Stanadyne Injector Set fits 1983 - 1994 6.9L / 7.3L IDI Non-turbo - Set of 8 - For the discriminating buyer who appreciates the best quality, these genuine OEM Stanadyne 7.3 & 6.9 IDI injectors are unquestionably the best available. These are some of the best 7.3 injectors and new return orings and copper chamber gaskets are included with them. Need injectors for your 7.3L IDI turbo? See related items below NOTE: These Stanadyne injectors will NOT fit 1994 and newer...

FORD -6.9L / 7.3L IDI - Injection Line Clamp Set Fits1983 - 1994 Pickup Applications(Not for Van applications) Are your injection lines constantly breaking? Over the years the injection line clamps have been left off of many IDI's. Because they are definitely a bit of a nuisance to install and may seem unnecessary, many technicians have neglected to re-install them over the years. However, fuel injection line clamps are absolutely critical to prevent constant injection line failure. Everything...

Ford 6.9L / 7.3L IDI Vacuum Regulator Valve Mechanical Conversion Kit Fits 1983 - 1994 There are still tens of thousands of good reliable old IDI Ford Diesels running around the world - unfortunately, there are some parts that are getting to be very hard or impossible to find, and the Ford vacuum regulator valve (VRV) is one of them. The VRV bolts to the side of the injection pump and receives a mechanical input from the throttle shaft which it then converts into a variable vacuum signal that...

- Set of 8 - Brand New Fuel Injection Line Set (Completely Assembled with clamps in place) fits Ford / International VANS with 6.9L and 7.3L IDI engines from 1982 - 1994 (Note: If you have a truck, please see related items below for truck specific lines.) If you are rebuilding your engine or replacing your pump, now is a great time for new lines - injection lines do occasionally rupture and can leave you stranded. Trucks in northern states usually exhibit very rusty and pitted lines further...

- BRAND NEW - Genuine OEM Stanadyne Injector Set fits 1993 - 1994 7.3L IDI Turbo - Set of 8 - For the discriminating buyer who appreciates the best quality, these genuine OEM Stanadyne 7.3 IDI injectors are unquestionably the best available. New return orings and copper chamber gaskets included. Need injectors for your 6.9L / 7.3L non-turbo? See related items below NOTE: These Stanadyne injectors will NOT fit 1994 and newer Powerstroke diesels - see Powerstroke section. Typically by 100,000...

7.3L Ford IDI 1987 - 1994- Glow Plug Connector Set - Made in the USA The Problem:For a long time we have been taking calls from customers asking if we had the glow plug harness ends for their Ford IDI 7.3L Diesels. After being forced to say "No" many times, we finally decided to take the time to find an answer. The original connectors are now well over 20 years old, and most of them are in really sad condition. Unfortunately, the OEM connectors are long ago obsolete, as are the complete...

BRAND NEW Ford Vacuum Pump - 6.9L / 7.3L / Ranger These Ford vacuum pumps are not rebuilt or aftermarket reproductions. They are brand new from the Original Equipment Manufacturer - the highest quality available - at a fraction of the dealer cost! This Ford 6.9 / 7.3 / Ranger vacuum pump fits the following applications: 1983 to 1987 6.9 L.1988 to 3/1992 7.3 L IDI.1985 to 1987 Ranger 4 cylinder w/o turbo.1983 to 1991 Ranger 4 and 6 cylinder.Part number 5907 replaces Ford F4TZ-2A4151A.Repair...

BRAND NEW Ford Vacuum Pump - 7.3L IDI and Powerstroke Our 7.3 Powerstroke vacuum pumps are not rebuilt or aftermarket reproductions. They are brand new from the Original Equipment Manufacturer - the highest quality available - at a fraction of the dealer cost! This Ford 7.3 IDI vacuum pump fits the following applications: Ford 7.3 L from 1994 to 1995 including Powerstroke and IDI engines. Replaces Ford F4TZ-2A451-A. Repair shops, salvage yards, auto part stores, etc. may inquire about quantity...

Premium Diesel Glow Plugs Ford 6.9L / 7.3L IDI Made in the USA What makes our glow plugs superior? Domestically made - Our Ford 6.9 glow plugs are the only ones manufactured in the USA - any other brand you purchase is made in another country - support American workers! OEM Quality - Mention any major player in commercial diesel engines, and our manufacturer has probably made their glow plugs. In fact our glow plugs come out of the very same factory that exclusively manufacturers glow plugs...

Premium Diesel Glow Plugs 6.9L Ford / International Made in the USA What makes our dual coil Ford glow plugs superior? Domestically made - Our 6.9 diesel glow plugs are the only ones manufactured in the USA - any other brand you purchase is made in another country - support American workers! OEM Quality - Mention any major player in commercial diesel engines, and our manufacturer has probably made their glow plugs. In fact, our dual coil 6.9 diesel glow plugs come out of the very same factory...

- Set of 8 - Brand New Fuel Injection Line Set (Completely Assembled with clamps in place) fits Ford / International Trucks with 6.9L and 7.3L IDI engines from 1982 - 1994 (Note: If you have a van, please see our related items below for van specific lines.) If you are rebuilding your engine or replacing your pump, now is a great time for new 6.9 or 7.3 IDI injector lines -- injection lines do occasionally rupture and can leave you stranded. Trucks in northern states usually exhibit very rusty...

Injection Pump Solenoid (Includes Top Cover Gasket) Fits Stanadyne and Roosamaster Ag and Industrial pumps (24 volt systems). Fitments include HUMVEE, John Deere, Case, and many construction, industrial, and commercial applications. Replaces the following part numbers (and others): 26387, RE20650, AR90341, 22-51000, 5945-01-517-3434, Bicron If this solenoid fails you may experience: Equipment will not start Equipment will not start hot Equipment quits when it gets hot To check the Stanadyne...

Injection Pump Solenoid This injector pump solenoid fits all GM 4.3L, 5.7L, 6.2L, and 6.5L mechanical pumps as well as Ford 6.9L and 7.3L IDI in addition to most Stanadyne and Roosamaster Ag and Industrial pumps (12 volt applications).Replaces part number 26214. If this Stanadyne injection pump solenoid fails you may experience: Truck will not start Truck will not start hot Truck quits when it gets hot To check the solenoid, you can energize the front electrical terminal on the injection pump...

- Fuel Tank Switching Valve - "6 PORT" FITS: FORD Diesel 1985 - 2016 This is an EXACT FIT replacement part!(NOT a universal part that will require re-wiring or adaptation) Detailed Applications Engines:6.9L IDI7.3L IDI7.3L Powerstroke6.0L Powerstroke6.4L Powerstroke6.7L Powerstroke Models / Years:1987 - 1989 E150 E250 E350 F250 F3501987 - 1988 Ford Ranger1985 - 1997 F250 F3502000 - 2016 F250 F350 F450 F550 Super Duty Fuel tank selector valve replaces the following part numbers: F4TZ9189A,...

Super Duty Front Inner Axle Seal Installer Front Axle Seal Applications: All Ford Super Duty straight axle trucks 1978 - 2016 (Dana 50 / Dana 60 Axle) Is there oil leaking out the ends of the front axles tubes on your Super Duty Ford truck? If so, it is time for some new inner axles seals. If you have ever attempted this job before, you know that installing these oil-bath design seals is nearly impossible without the correct tools. Improvised methods involving boards, sockets, or hammers will...

- Brand New - VACUUM PUMP DRIVE MECHANISM FITS Ford 6.9L / 7.3L ID from 1983 through March 1992 NOT rebuilt or aftermarket reproduction PLEASE NOTE: This is the drive mechanism only - the Powerstroke vacuum pump POD is NOT included. It is very common for the bearings in these pumps to fail. If your pump still produced vacuum, but the bearings have failed, you can purchase this unit, swap your POD over in a matter of moments, and be ready to roll! NOTE: These drive mechanisms contain oil...

- Brand New - VACUUM PUMP DRIVE MECHANISM FITS Ford 7.3 L IDI and Powerstroke from 3/1992 through 1995 NOT rebuilt or aftermarket reproduction PLEASE NOTE: This is the drive mechanism only - the vacuum pump POD is NOT included. It is very common for the bearings in these pumps to fail. If your pump still produced vacuum, but the bearings have failed, you can purchase this vacuum pump mechanism unit, swap your POD over in a matter of moments, and be ready to roll! NOTE: These drive mechanisms...